SXQ-G1 UV Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. SXQ-G1 is a cold mounting machine that uses UV light source irradiation to quickly cure resin. Pour the resin into a specific cold mounting mold and place it in the work chamber. In just 60 seconds, a completely transparent sample can be obtained. Rapid sample preparation, without bubbles, can meet the requirements of high-quality sample preparation.
Product Details
Features:
Fast sample preparation speed, transparent mounting completion time only takes 60 seconds.
The work chamber has a large capacity accommodating up to 20 samples (Ф30mm) at the same time
Internal aluminum alloy structure, easy to maintain.
Dual light source ultraviolet LED, with all-round and no dead angle illumination.
Low shrinkage rate, can freely set irradiation time
If the initial temperature is 22 ℃, the polymerization temperature is about 70 ℃.
The hardness of the cured sample is about 84~86 Shore D.
1L curing agent can make 55-65 pieces of Ф30mm samples.
Technical parameters:
|
Model |
SXQ-G1 |
|
work chamber dimensions |
240×150×37mm, accommodating up to 20 samples (Ф30mm) |
|
uv light |
dual light source UV 365+405nm |
|
exposure time |
0~999s |
|
power supply |
220V, 50Hz |
|
dimensions |
270×230×320mm |
|
net weight |
22kg |
Packing list:
|
No. |
Name |
Qty |
|
No. |
Name |
Qty |
|
1 |
machine body |
1 |
|
3 |
UV curing agent |
1 |
|
2 |
cold mounting mould 25/30/40mm |
5 |
|
4 |
usage instruction manual |
1 |
Get a Quote or More Information
Our technical experts are ready to help you configure the perfect testing solution for your specific requirements. Fill out the form and we'll get back to you within 2 hours.